Waterproof Anti-moisture Sticker


Product Features:

1. Removable, non-trace gum
2. Waterproof, anti-moisture
3. Green and environmental protection wall stickers
4. Product Role: home decoration

Product Parameters:

  1.  Material: non-wovens + PVC
  2. Application: kitchen, bathroom, washout table, bathroom
  3.  Product Size: about 3.8 * 320cm / 1.50 * 125.98in

Installation instructions: 

  1. Thoroughly remove the original silicone sealant with the knife.
  2. Use organic solvents (thinner), such as rubber water, gasoline, etc., to clear the surface residue.
  3. The surface is completely dry.
  4. Installation indoor temperature range is best around 25 degrees, too cold place can be heated by electric hair dryer viscose, in the paste.
  5. Remove the plastic film on the back of the viscose surface, fold it to 90 degrees, and paste it on the bathtub and the wall surface.
  6. 90 degrees when the corner of the paste, the docking side should be cut into 45 degrees to the interface.
  7. After compaction, 8 hours to 10 hours later can be used.

Packing List:

1 x Kitchen Ceramic Sticker


1.The actual color of the item may be slightly different from the pictures shown caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight deviation for the measurement.
You have successfully subscribed!
This email has been registered